Polyurethane coal retaining belt sealing guide chute rubber anti-spillage skirt plate Y-type

Polyurethane Coal Barrier Belt Sealing Chute Y-Type Anti-Spill Skirt

Chute anti-spill skirt, Y-type anti-spill skirt, T-type anti-spill skirt. Supply various models of anti-spill skirts.

The anti-spill skirt consists of a vertical plate and side plates. The side plates have excellent flexibility, and the bottom surface of the vertical plate is curved to contact the belt. The side plates and vertical plate are integrated, providing a double-layer sealing effect with good sealing performance. It also offers the advantages of wear resistance and not damaging the belt.

The side seal can be adjusted in height according to the distance between the belt edge and the chute until it is appropriate. The YZ side seal fits well with the belt, ensuring it does not exceed the belt edge and avoids being cut. The sealing groove of the side seal adopts a single-sided arc transition, preventing the side seal from being cut when the belt deviates and allowing it to automatically return to its original state.

The tightening methods include butterfly nut locking and handle locking, making installation and removal convenient and fast. The pressure on both sides of the angle steel can be adjusted independently to ensure even pressure and prevent the side seal from falling off.

Classification of anti-spill skirts:

Anti-spill skirts are divided into Y-type and T-type anti-spill skirts. These two types are also known as double-seal anti-spill skirts. They consist of inner and outer layers, with polyurethane blocks thermally vulcanized at the bottom. The addition of polyurethane significantly enhances the wear resistance of the anti-spill skirt, while the rubber seals the chute and belt.

It is also important to note that the rubber and polyurethane of the anti-spill skirt must be thermally vulcanized. In contrast, cold bonding methods may cause the polyurethane to detach after long-term use.